Ford OBD II Rear Camera Activator

Skip the hassle of going to the dealer and unlock and activate the backup camera feature in your Ford on your own with our new Ford Rear View Camera Programmer. This easy to use tool connects into the OBDII port on your vehicle and activates your backup camera in seconds! Pair our OBDII Ford rear view camera Programmer with the Ford backup camera harness kit to have everything you need to get the backup camera feature in your car.

VEHICLE COMPATIBILITY

• 2010-2014 Ford Econoline E-Series
• 2010-2020 Ford Edge
• 2010-2020 Ford Escape & Escape Hybrid
• 2010-2020 Ford Expedition
• 2010-2020 Ford F-150
• 2010-2020 Ford Flex
• 2010-2020 Ford Fusion
• 2010-2020 Ford Mustang
• 2010-2020 Ford Super Duty F-250-F-550
• 2010-2020 Ford Taurus
• 2012-2020 Ford Explorer & Sport Trac
• 2012-2020 Ford Focus
• 2013-2020 Ford C-Max
• 2014-2020 Ford Fiesta
• 2014-2020 Ford Transit
• (Dealer Code XAC)

Compatible with all Sync 1 (6.5" Display), MyFord (4" Display), MyFord Touch Sync 2 (8" Display), and Sync 3 (8" Display).

*Not Compatible With Transit Connect.*

INSTALLATION

1. Put the vehicle in Accessory mode. (This is where the vehicle is on, but not running)
2. Wait 1 minute.
3. Plug the OBD II programmer into the OBD2 port.
4. Wait for the green light and/or for the horn to honk.
5. Enjoy your new upgrade!

Dedicated to Your Vehicle for Life! 

Our OBD II Programmer is dedicated to your vehicle's VIN number.